wanted a fill. switch crosley 2 step amp.

does any one have a fill. on off switch for a crosley 2 step amp. or one that will work Jewel

What do she look like???

I am not sure

If this is the amp.....



It looks like the same switch that the V and other sets from that series use..... It's a 3 piece affair IIRC - the center piece and the 2 screws (above and below) hold the contact strips...

There may be more than one amp called a Two Step. The ones I have seen with "Two Step" on the panel have a "dead end" to the rheostats that serves as the "off" position, not a separate switch.

The switch knob shown above is like that on the "X" as well. You could be arguably correct with a metal handle switch from a Trirdyn - which is correct for a 50A and 51A, and would be easier to find.

thank you for the imfo. Jewel

I suspect the switch in this example is a replacement.... it looks much too substantial to get Crosley's approval.....

Why don't you check an authoritarian Crosley website and find out?

http://www.crosleyradios.com/

Even though it was tongue-in-cheek (ie., SARCASM), I really can't find anything there to deny my postulation..... The "authoritarian" example may well have a replaced switch.... With the suspect switch shown - there would be no need for the screws above and below - which held contact strips in the original design.... ....

I understand that Powel's slogan "Better -- Costs Less" was interpreted to his engineers as "better cost less".

Here's what it likely looks like from the backside....

mine is like the first picture model 1v

THANK YOU JG JACKSON I HAVE INSTALLED A REPLACEMENT SWITH. MINE DOES NOT HAVE THE CROSLEY NAME ON IT I THINK MAYBE SOMEONE IN THE PAST HAS RUBBED IT OFF Jewel